The Nano is a single product from the ipod mp3 player household developed by Apple. The fourth generation of this product attributes a prolonged slim circumstance and a tiny, square touch LCD display on the front. All of the internal workings of the ipod are contained in a handful of modest elements inside of the circumstance. If you have a fourth-generation Nano and want to disassemble it, you can simply do it oneself in a comparatively brief volume of time.
Points You are going to Will need
- Guitar select Jeweler's Philips screwdriver Jeweler's slotted screwdriver
Pry off the white plastic bezel on the best and bottom of the ipod making use of a guitar decide on. The bezels will unclip from the Nano, so preserve your fingers over them to cease them from flying away from you.
Consider the electrical power change from below the top rated bezel and set it aside. It will be unsecured to anything at all when the bezel is eliminated.
Get rid of the two modest screws on the top rated and the 3 on the bottom of the ipod with the Philips screwdriver. Pry off the metal piece on the bottom of the ipod employing the suggestion of a jeweler's slotted screwdriver.
Elevate the best metal piece out of the top rated of the ipod by gently prying it upward. It will Take caught the moment it is approximately a single-fourth inch out of the situation by the change on the back again of the ipod.
Pull the change on the back again of the ipod away and proceed to pull the contents out of the situation. End pulling the moment you can see the cables in appropriate underneath the bottom edge of the LCD display screen.
Compress the bottom edge of the glass previously mentioned the display screen into the scenario with your fingers. You are going to be able to use the flat instrument to pry the glass off from the leading edge and Get the glass away from the ipod.
Raise the ribbon wire connecting the reduced-left corner of the display to the in of the ipod. This will disconnect the wire and let you to very carefully pull the internal components fully out of the circumstance.
Slide the flat device involving the battery and the back again of the Nano situation to separate them. The moment the battery is lifted up, you can start off to push it down out the bottom of the scenario right up until the locking cable is visible along the bottom of the battery.
Get off the locking cable by lifting it up, and make confident no glue is keeping it in area. Slide the battery out the relaxation of the way from the circumstance.
Slide the flat instrument among the front of the situation and metal backing plate of the clicker wheel to separate them. Push the clicking wheel down by way of the bottom of the circumstance.
No comments:
Post a Comment